Bottle blowing machine

商品说明

Bottle Blow Molding Machine:

1. Automatically arrange the preform into the pre-heater, bottle will drop out automatically from mould.
2. Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
3. Pre-heater use single unit rotation heating design, preform heating center distance smaller, heating speed more faster, compare to old design with double unit rotation heating design, Electricity save 20%.
4. Special mould locking system enables faster mould locking while saves the source a lot.

5. Suitable for mineral water bottle, carbonated beverage, fruit juice bottle, oil bottle, cosmetic bottle.

Technical Parameter:

Items		Unit	Model
Items		Unit	FL-6C5L	FL-5C5L	FL-4C5L	FL-3C5L
Molding Spec.	Cavity Pitch	mm	190	190	190	190
	Preform Heating Pitch	mm	63.50	63.50	63.50	63.50
	No.of Cav.	Cav.	6	5	4	3
Container Spec.	Max.Container Volume	L	5	5	5	5
	Neck Diameter Range	mm	39-45	39-45	39-45	39-45
	Diameter of support ring	mm	57	57	57	57
	Max.Container Diameter	mm	180	180	180	180
	Max.Container Height	mm	330	330	330	330
Theoretical Output		BPH	6000-6600	5000-5500	4000-4600	3000-3600
Power Spec.	Rated Power	KW	180	168	159	118
Power Spec.	Power Consumption	KW	80-90	68-78	58-65	46-56
Compressor Spec.	Blowing Pressure	Mpa	2.8-3.5	2.8-3.5	2.8-3.5	2.8-3.5
Compressor Spec.	Air Consuming	m3/min	16	14	12	9
Main Machine Spec.	Size	mm	1180037503300	931636353300	818135353300	720034353300
Main Machine Spec.	Weight	Kg	11500	10500	9500	8000

Features:

1).  Stable performance with advanced PLC.
2).  Automatic preform conveyer to save human cost.
3).  Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle
shaping rate, increase the production.
4).  High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5).  High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6).  Introduce the FESTO air cylinder to avoid contamination and noise.
7).  Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8).  Strong clamping force with high pressure and double crank links to lock the mould.
9).  Two ways of operating: automatic and manual.
10). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.
11). Ideal cooling system make the finished bottles without any flaws.